• We want to encourage those of you who ENJOY our site and find it USEFUL to DONATE and UPGRADE your membership from active member to donating or premium membership. If you want to know the differences in membership benefits, please visit THIS PAGE:

    https://www.hobby-machinist.com/premium/

    Donating memberships start at just $10 per year. These memberships are in fact donations that help pay our costs, and keep our site running!
    Thank you for your donation, God Bless You

  • As some of you know, I have wanted to stop managing H-M for some time. It's a tremendous strain on my personal life. I want to set up my own shop. In September, September 15, to be exact, it will be 8 years that Hobby-Machinist has been in existence.

    We've seen a lot of changes. In March, 4 moderators left to start their own site. They took some of you with them. So now you have split loyalties. You know who you are. They didn't like my way of managing this place, and thought they could do better without me. They didn't. The only thing holding them together is that they hate me. Their site was down until mid July. That is why I wanted to stay involved on here until they could learn to run this place. But they wanted me to leave right away, without the training part.

    Anyway, I have been training VTCNC to run things here. Dabbler is going to learn too. I feel that they are ready to start taking over the operation. I will be here to help in case they need, but I don't think they will. Tony Wells is and will be here also to consult with. I will be doing backups, upgrades, and installing addons. Other than that, I don't want to know about this place.

    What about the 4 moderators who were disloyal? I don't care. It isn't my call anymore. I would think that, rather than fumble, they ought to come back and do good work. That's up to them. If they want to return to try to lead more members to their site, I am done caring. I suffered too much aggravation worrying about it. I don't plan to spend any more. What they do impacts on them. I have my own opinions including those of you who followed them there. No longer my problem.

    I am leaving this place in good operating condition, and financial condition.
    --Nelson
[4]

Cold Rolled

[3]
[10] Like what you see?
Click here to donate to this forum and upgrade your account!

ddickey

H-M Supporter - Gold Member
H-M Supporter - Gold Member ($25)
Joined
Apr 21, 2016
Messages
1,596
Likes
825
#1
I know 1018 can warp when milling. Is that the case for all cold rolled materials?
 

RJSakowski

H-M Supporter - Gold Member
H-M Supporter - Gold Member ($25)
Joined
Feb 1, 2015
Messages
3,376
Likes
3,857
#2
Cold rolling introduces a lot of stress into the piece. The stresses are largely opposing and balance each other out. Removing material from one side removes some of the stress from that side which causes the piece to warp. All cold rolled will exhibit this. The same can be true for extruded materials as due to shrinkage as the material cools from the outside in to the core.
 

P. Waller

H-M Supporter - Sustaining Member
H-M Platinum Supporter ($50)
Joined
Mar 10, 2018
Messages
328
Likes
195
#3
Have it stress relieved before machining, this is often included in the machining instructions on customer drawings

"Stress relieve before finish machining"
 
[6]
[5] [7]
Top