I bought the AXA qctp from CDCO and a 3/32" blade for the parting tool in the set for my G0602 lathe.
I was disappointed in the action of the blade when parting off on 12L14 steel; 1-1/4" diameter.
Blade was 90 deg. to the stock and on center.
Spindle speed was 560 and moderate feed pressure with cutting oil.
A lot of chatter so I am looking for suggestion and hints.
It may just be me.
Thanks,
Bill
I was disappointed in the action of the blade when parting off on 12L14 steel; 1-1/4" diameter.
Blade was 90 deg. to the stock and on center.
Spindle speed was 560 and moderate feed pressure with cutting oil.
A lot of chatter so I am looking for suggestion and hints.
It may just be me.
Thanks,
Bill