- Joined
- Sep 26, 2013
- Messages
- 408
black and red "should " be armature..
I'll change the black to A1 from F2, the brown to F2 from A1 and give it try
Brian
Well that didn't work out too well! Blew a fuse, actually two but I don't know if one was from the first time I tried powering it up using my diagram/note. Need to find some 8amp 3ag fuses locally or order from the net
white brown should have dc voltage when on and dial at 0
I was getting power when I s tested the white and brown but only in the reverse position, nothing in the forward position, but this could have been caused by the forward position fuse being blown previously. My quest continues(soon as I source 8amp 3ag fuses.
Brian