- Joined
- Oct 4, 2020
- Messages
- 484
I recently turned quite a bit of cast iron. I did what I could to contain it and vacuum it, but you know how it is.
I noticed tonight that I had a little clump of dark dust in my sight glass for the headstock... I plan on taking the lid off, and flushing the headstock out with kerosene.
Big assumption on my part, but I assume dust can get in through the spindle bearings?
I noticed tonight that I had a little clump of dark dust in my sight glass for the headstock... I plan on taking the lid off, and flushing the headstock out with kerosene.
Big assumption on my part, but I assume dust can get in through the spindle bearings?