- Joined
- Sep 8, 2022
- Messages
- 3
Hello,
I recently acquired an Atlas benchtop Horizontal Mill. It came with the overarm, arbor, support and a whole pile of stuffs. While I know there is an "atlas specific" dividing head, the impression I get is that they are in the same field with the Unicorns. I was looking at some BS-0 size dividing heads, but they weigh 40-50 pounds, and I didn't know if that would be too heavy/big for the little mill. My primary use would be gear and pinion making for antique clocks. Pic of storage trailer fresh Mill attached. Thanks!
I recently acquired an Atlas benchtop Horizontal Mill. It came with the overarm, arbor, support and a whole pile of stuffs. While I know there is an "atlas specific" dividing head, the impression I get is that they are in the same field with the Unicorns. I was looking at some BS-0 size dividing heads, but they weigh 40-50 pounds, and I didn't know if that would be too heavy/big for the little mill. My primary use would be gear and pinion making for antique clocks. Pic of storage trailer fresh Mill attached. Thanks!