- Joined
- Oct 2, 2019
- Messages
- 2
Hello,
I am trying to get some old machines working and modified to allow me to begin metalworking.
My first project is going to be restoring this small drill press. I don't currently have any information as to the make or model but the chuck still moves freely so I'll consider that a start. The base does have a large crack but no big deal.
I'd like to convert from a pulley to some sort of gearbox. And eventually convert this in to a small mill. Now I know that the spindle on most drill presses isn't really built for sideways forces, but I don't plan on using it to mill anything tougher than some hdpe. As far as a gearbox I am wondering if hdpe would be acceptable for light duty gearing as I don't have the equipment to make any metal gearing yet.
I thought I would add this here to track the progress and maybe contribute. I am open to any advice.
Sent from my SM-G955U using Tapatalk
I am trying to get some old machines working and modified to allow me to begin metalworking.
My first project is going to be restoring this small drill press. I don't currently have any information as to the make or model but the chuck still moves freely so I'll consider that a start. The base does have a large crack but no big deal.
I'd like to convert from a pulley to some sort of gearbox. And eventually convert this in to a small mill. Now I know that the spindle on most drill presses isn't really built for sideways forces, but I don't plan on using it to mill anything tougher than some hdpe. As far as a gearbox I am wondering if hdpe would be acceptable for light duty gearing as I don't have the equipment to make any metal gearing yet.
I thought I would add this here to track the progress and maybe contribute. I am open to any advice.
Sent from my SM-G955U using Tapatalk