Started a new thread...
I've NEVER used a DRO...just an old crank and dial guy so...I can use some help, I don't know what these options are, and there are no directions.
What is ANTI-SHAKE
What is X-Diameter
What is JOINT
Also photo of the SETUP menu and no way (I see) to reduce the digits after the decimal point.
Any other help is appreciated!!
![20240421_122636.jpg 20240421_122636.jpg](https://www.hobby-machinist.com/data/attachments/444/444588-404d6c49e8d24537662ab2f6e8f5cfa5.jpg)
![20240421_122702.jpg 20240421_122702.jpg](https://www.hobby-machinist.com/data/attachments/444/444589-75fc69a0d3b48df59db8c8281d778f28.jpg)
I've NEVER used a DRO...just an old crank and dial guy so...I can use some help, I don't know what these options are, and there are no directions.
What is ANTI-SHAKE
What is X-Diameter
What is JOINT
Also photo of the SETUP menu and no way (I see) to reduce the digits after the decimal point.
Any other help is appreciated!!
![20240421_122636.jpg 20240421_122636.jpg](https://www.hobby-machinist.com/data/attachments/444/444588-404d6c49e8d24537662ab2f6e8f5cfa5.jpg)
![20240421_122702.jpg 20240421_122702.jpg](https://www.hobby-machinist.com/data/attachments/444/444589-75fc69a0d3b48df59db8c8281d778f28.jpg)