[4]

Feeler for possible part out of a 111 mk3a

[3]
[10] Like what you see?
Click here to donate to this forum and upgrade your account!

CarlosA

H-M Supporter - Gold Member
H-M Supporter - Gold Member ($25)
Joined
Nov 12, 2015
Messages
126
Likes
51
#1
Wanted to see if anyone on this forum would be interested in parts from a very worn out mk3a 111 - if so i`ll make a formal post on the classifieds area.

I think the bed and carriage on this machine are too far gone for me to be able to bring it back to good operating condition.

All functions of the gearbox and automatic apron do work, though there is about a half a turn of backlash in the cross slide and 1/4 in the compound.
 

Attachments

Barncat

H-M Supporter - Silver Member
H-M Supporter - Silver Member ($10)
Joined
May 14, 2018
Messages
72
Likes
30
#2
I may be interested, depending on price of course.
 

CarlosA

H-M Supporter - Gold Member
H-M Supporter - Gold Member ($25)
Joined
Nov 12, 2015
Messages
126
Likes
51
#3
I may be interested, depending on price of course.
What parts are you looking for? I am not looking to recoup much out of it.
 

Barncat

H-M Supporter - Silver Member
H-M Supporter - Silver Member ($10)
Joined
May 14, 2018
Messages
72
Likes
30
#4
The only piece on mine that is actually broken is the flat bar on the underside of the carriage that clamps the carriage in place when the lock screw is tightened into it.

I may be interested in the thumb wheel that locks the back gear, mine is beat up, but working.

A spindle assembly with the bearings would be of interest, since the bearings are hard to come by. But I would let anyone else that actually needs bearings take a crack at that before me. I was just thinking of a just in case future scenario.
 

COMachinist

Active User
H-M Platinum Supporter ($50)
Joined
Sep 10, 2013
Messages
293
Likes
107
#5
I’ll take the head stock, I need the spindel, gears and pulleys. I’ll take the apron and lead screws also, as well. I can have a freind pick it up after I pay for it he can store it untill I get up to Portland to get it. I have family that lives there. Let me know what you think, and prices. Need to rebuild my Clausing 111 mk3a. As minimum I’ll take the the spindle and back gears.
CH
 

middle.road

Actively Learning...
H-M Supporter - Gold Member ($25)
Joined
Apr 28, 2014
Messages
1,548
Likes
840
#6
I would be interested in the Tail Stock. Need to put tegether something to use with my RoTab on the mill.
Can you measure what the dimension to center is from the bed?

Thanks.
 
[6]
[5] [7]
Top