- Joined
- Dec 18, 2019
- Messages
- 6,447
Going to print this up tonight. Hope it completes. Not sure if this belongs here or in the 3D section. Modeled this in FreeCAD. This is my ELS board sitting in an enclosure. The bottom piece of the enclosure is printing now. Need to work on the top part with the opening for the display. Lots of things to line up. A draft print seemed to be pretty good, so I was encouraged.
Draft printed box with real PCB. GX16 and GX12 connectors fit in the side D cutouts.
Draft printed box with real PCB. GX16 and GX12 connectors fit in the side D cutouts.