From the scrapyard

poppaclutch

Active User
Registered
Joined
Aug 31, 2013
Messages
54
I found a Cigarette Tax Stamp application machine at the scrapyard. Got plenty of stuff off it including electric and air motors and these power supplies.
Don't understand them yet but I have been downloading product info to see if they might be of any use.
Rick
IMG_9343-r.pngIMG_9350-r.png

IMG_9343-r.png IMG_9350-r.png
 
Nice score. Lots of good pieces parts and a real nice drive!

As they say about Allan Bradley:

"You can buy better,

But you can't pay more!"
 
Nice score. Lots of good pieces parts and a real nice drive!

As they say about Allan Bradley:

"You can buy better,

But you can't pay more!"

:roflmao:

I've said that myself. I spent many years at an automation place that had standardized on AB equipment. Good stuff, but man they are proud of everything they make! At minimum I see a nice VFD with all the trimmings there, probably nicely sized for a home size machine.
 
The power flex unit appears to be made by Rockwell Automation for motor control you might have some thing that one
 
THERE ARE ALL KINDS OF LITTLE GOODIES IN THERE !!
Nice Score!!
 
Rockwell owns Allen Bradley.

AB-cream colored enclosure

Rockwell-blue enclosure

Same drive on the inside. No wonder they interface so well.

For you computer guys, has anybody mentioned all the cool features you can bring up from these drives and display?
Volts, amps, run-time, trip history. All kinds of geeky stuff!

Probably all made by Hitachi--just a guess.
 
Wow! Got a feeling this is gonna be great once I figure out what all this stuff is for!

One thing not shown, on the cover of the smaller box, was a Watlow temp control. I do have two kilns but it will probably end up on my 10lb. Lee Melting Pot.
 
Back
Top