- Joined
- Dec 7, 2020
- Messages
- 47
The machine that I've been using also has a 3 axis DRO with the Z axis being tied to the quill position. There is no indication for the gross vertical position.
The (new to me) G0759 has a 3 axis DRO. But the Z axis is on head position adjustment. Basically what I would call the equivalent of the knee on a knee mill.
The quill has a separate Z axis DRO. Small, LCD, hard to read unless you're directly in front of it.
When would a DRO on the head position be useful?
The (new to me) G0759 has a 3 axis DRO. But the Z axis is on head position adjustment. Basically what I would call the equivalent of the knee on a knee mill.
The quill has a separate Z axis DRO. Small, LCD, hard to read unless you're directly in front of it.
When would a DRO on the head position be useful?