I always unplug my lathe when not in use. Lathe worked fine a couple of days ago, but wouldn't power up this morning, Strong smell of bunt electrical component upon opening of cover and the main relay tripped and won't reset as if it is no good, not an existing short in the system. There is 240 to the relay but nothing beyond that (also no work light) so I'm pretty sure it is NG. Any insight as to why it would go upon plug in? Main power button was pushed in, every thing properly shut down.
I wall call Tech support Monday morning and don't expect any problems. Just curious if anyone has had the problem.
I wall call Tech support Monday morning and don't expect any problems. Just curious if anyone has had the problem.