[4]

G4016 carriage and cross slide locks?

[3]
[10] Like what you see?
Click here to donate to this forum and upgrade your account!

ChrisAttebery

Rocket Nerd
Registered
Joined
Jan 11, 2018
Messages
86
Likes
84
#1
Hello,

I just bought a G4016 clone and I'm trying to find out how you lock the carriage and cross slides. I don't see any thumb screws and there isn't anything about them in the manual.

Thanks,


Chris
 

DAT510

H-M Supporter - Gold Member
H-M Supporter - Gold Member ($25)
Joined
Oct 20, 2016
Messages
317
Likes
196
#2
The G4016 looks like a geared head version of my lathe. The carriage looks quite similar. On my lathe the Carriage Lock is where the Red Arrow is. Neither the Cross-slide or Compound on my lathe have locks.

g4016_pl_17_1000.png
 

T Bredehoft

Active User
H-M Supporter - Gold Member ($25)
Joined
Dec 27, 2014
Messages
2,737
Likes
2,102
#3
For the cross slide and compound locks, many of us loosen one nut on one of the gib screws and snug that screw down for a lock.
 

ChrisAttebery

Rocket Nerd
Registered
Joined
Jan 11, 2018
Messages
86
Likes
84
#4
OK, I'll look at that hole on the carriage tonight.

Looking at the manual there are M6x1 set screws (655, 656) on the cross slide and compound where my 12x36 BDL had thumbscrews. I'll pick up some thumb screws the next time I'm at the HW store.
 

ChrisAttebery

Rocket Nerd
Registered
Joined
Jan 11, 2018
Messages
86
Likes
84
#5
DAT520, it's right where you said it was. Thanks.


Sent from my iPhone using Tapatalk
 
[6]
[5] [7]
Top