- Joined
- Sep 2, 2013
- Messages
- 5,100
I like John's power steering pump idea. Something off a small import would be fine, and install an adjustable inline bypass to get the output right where you need it. Mike
-
Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!
Got my new SG project today.
- Thread starter Razzle
- Start date
- Joined
- Jul 22, 2013
- Messages
- 122
Good to know about the hoist reach. I was worried about that. Guess I will have to spend a bit more.
The handle isn't cracked. Just bent right now. It is far enough out to rub on the indicator. I will noodle on that one for a while.
On the hydraulics issue, I have some confusion.
The manual only shows two lines coming off of the right side of the table. Feed and return. I have 3 lines. Haven't identified where the third goes yet as I haven't pulled the table. Need the hoist for that.
Sent from my Pixel 4a using Tapatalk
The handle isn't cracked. Just bent right now. It is far enough out to rub on the indicator. I will noodle on that one for a while.
On the hydraulics issue, I have some confusion.
The manual only shows two lines coming off of the right side of the table. Feed and return. I have 3 lines. Haven't identified where the third goes yet as I haven't pulled the table. Need the hoist for that.
Sent from my Pixel 4a using Tapatalk