- Joined
- Sep 1, 2020
- Messages
- 794
@rabler @Dabbler , okay just posting that made me smile! I really appreciated both of your comments regarding the Grizzly vertical band saws in the “Need a Lathe Now!” thread. In my usual manner of getting off on tangents, i realized i should not respond in such off-topic ways. I really enjoy getting to learn from all the knowledge on this forum, I get carried off sometimes…
i am really happy with my g640 and mentioning what i found to be “shortcomings“ for me, you both offered some valuable input. Im hoping to pick your brains some more about these Grizzly saws.
I did replace the table insert, but im not convinced the “zero-clearance” aluminum insert I’m using is ideal.
I for sure am interested in the prospects of reprogramming the VFD to slow down the speed of the saw some.
Looking inside the first time, i see a commercial “Delta” VFD for which there may be support available for. Once again, i feel like this machine was a good value. My VFD seems to be missing a user interface. Any tips on how to proceed on the programing would be really cool! Im interested to hear what speeds and saw blades folks are using as i use mine for general utility and normally don't like to change the saw bands more than i have too.
i am really happy with my g640 and mentioning what i found to be “shortcomings“ for me, you both offered some valuable input. Im hoping to pick your brains some more about these Grizzly saws.
I did replace the table insert, but im not convinced the “zero-clearance” aluminum insert I’m using is ideal.
I for sure am interested in the prospects of reprogramming the VFD to slow down the speed of the saw some.
Looking inside the first time, i see a commercial “Delta” VFD for which there may be support available for. Once again, i feel like this machine was a good value. My VFD seems to be missing a user interface. Any tips on how to proceed on the programing would be really cool! Im interested to hear what speeds and saw blades folks are using as i use mine for general utility and normally don't like to change the saw bands more than i have too.