- Joined
- Jan 14, 2013
- Messages
- 290
I was told that they were no lever collet attachment for the 4003g because the outbord end of the spindle is not threaded for one. With the prospect of taking on some work that would require repetitive work I knew it would be a lot easier with one, So with nothing pressing I decided to make one fit. looking at the attachments on line grizzly had one on sale for for the 14" lathe and knowing that it would be a simple as making a adapter and shorting the tube to the correct length this would be a simple task.
Here is some photos of a leaver collet attachment on the lathe.
Here is some photos of a leaver collet attachment on the lathe.
Last edited by a moderator: