- Joined
- Dec 25, 2023
- Messages
- 94
My 199-Y came to me without a clamp bolt, nut, or block under the tailstock. I've made a few measurements of the underside of the bed to get an idea of its general size, but I know that the original block had an elongated hole in it to provide clearance during set-over operations. I need to get this made so I can do my first test bar.
I can find clamp blocks all over the internet for the 9, 10K, and 13... well, essentially everything EXCEPT the 10R/L. Does anyone have one close enough to being apart to be able to measure their clamp block for me? L/W/H, and length of the hole.
Many thanks,
Nick
I can find clamp blocks all over the internet for the 9, 10K, and 13... well, essentially everything EXCEPT the 10R/L. Does anyone have one close enough to being apart to be able to measure their clamp block for me? L/W/H, and length of the hole.
Many thanks,
Nick