Help Identify What Taper Tooling I Have

[jbaccell]

Good Afternoon, I posted this on another site as well,

I recently purchase a KO Lee B960 T&C Grinder that came with quite a bit of tooling. It has a 5C powerhead but most of the tooling (chucks, faceplates etc.) appear to have a different taper (larger). I attached a few photos to help identify what the taper is on the tooling. I assume I would then need to purchase a work head that uses that taper?

My sincerest thanks and appreciation for any and all help, comments, guidance etc..

Joe

 

[Jackle1312]

Ko lee used an 11 B&S taper on their grinder attachments

 

[jbaccell]

Ko lee used an 11 B&S taper on their grinder attachments

Thank you, I appreciate it. I was told on another site that the power work head should have a 5C adapter that can be removed and the remaining taper should fir my accessories..

 

[Jackle1312]

That is correct. The 5c adapter should come out just depends on how tight it is in there.

 

[jbaccell]

Good Morning, thanks to information offered by members here and on another site, I successfully removed the 5C adapter from the power head of my new to me KO Lee T&C Grinder. All the accessories now fit and can be used...

Thanks so much,

Joe