HF metal bandsaw

[Jeff May]

I've had a HF metal cutting bandsaw for several years now.
After discovering this forum a question has come to mind.
I'm looking for ideas on how to make converting it from a cutoff saw to the option of using the table they came with a faster operation.
I'm sure someone here has to have a better way of changing back and forth other than removing the two screws everytime one wants to change the set up.
Thanks,
Jeff

 

[itsme_Bernie]

Well if not, I know I saw someone post a link to a site that modified it, and a lot of other machines.... Hmmm... I'll google that and get back to you

Bernie

 

[itsme_Bernie]

Hah hahhh! It WAS here!

http://www.hobby-machinist.com/showthread.php/87-Show-us-your-HF-4x6-Bandsaw-Modifications!

I don't own one, so I did enjoy looking here to see how I could add to my always-vertical bandsaw.

But you should look it over

Bernie

 

[hman]

Just another two cents' worth - there's lots of useful info at the 4x6bandsaw Yahoo group, and I do recall seeing at least one improved table.