- Joined
- Mar 26, 2018
- Messages
- 8,455
When I first got this lathe, (1941, 13"X 48" with single gear box, cast iron spindle bearings)
I went through the head, I cleaned all the old oil out with pipe cleaners and paper towels. I replaced the spring loaded cotton plunger applicators.
There are no drains that I can see on the "No Brass Bearings" style.
Am I missing something? The bearings and spindle are in pristine condition, I want to keep it that way.
It's time to change the oil.
Thanks for your ideas/experience.
I went through the head, I cleaned all the old oil out with pipe cleaners and paper towels. I replaced the spring loaded cotton plunger applicators.
There are no drains that I can see on the "No Brass Bearings" style.
Am I missing something? The bearings and spindle are in pristine condition, I want to keep it that way.
It's time to change the oil.
Thanks for your ideas/experience.