I'm cleaning my old LeBlond piece by piece. I just finished putting the apron back together and It seems that I have lots of leeway on how far I drive in the bushing on the bevel gear. If I drive it in all the way flush the 2 gears in the picture below do not even touch. If I drive the bushing out a little it takes up some play, but I don't know how far out I should drive it and I did not measure it before I took it apart. Any ideas?
The picture below shows how I currently have it and how much play is in the gears.
The picture below shows how I currently have it and how much play is in the gears.