How would one make a bezel for a touch display?

[MyLilMule]

If this works out, you have to show us the finished project.

The build plate on my son's big printer gives it an interesting texture.

 

[WobblyHand]

This is terrific! So far my thread on my ELS project is 24 pages long. Have to make lathe risers or jack up the lathe to mount the motor bracket. Also need to modify a few things to get the timing pulleys to line up for the encoder. Lots of stuff left to do, but I can see an end in sight.

 

[7milesup]

If this works out, you have to show us the finished project.

The build plate on my son's big printer gives it an interesting texture.

View attachment 417955View attachment 417956

Is that on his "big printer"? My Prusa can print 9"x8" roughly, and I don't consider it big. Just curious.

 

[MyLilMule]

Is that on his "big printer"? My Prusa can print 9"x8" roughly, and I don't consider it big. Just curious.

Actually, no. I was wrong. This was on his Anykubic Cobra. His Voron can do 300mm cubed. That's Yuuuge!

 

[7milesup]

Actually, no. I was wrong. This was on his Anykubic Cobra. His Voron can do 300mm cubed. That's Yuuuge!

Ahhhh. That makes more sense.

 

[WobblyHand]

Got it today! Thanks so much! It fits. If I were to redo it, I'd make the sides a little wider so I could cover up the screen on the left side. That was my design error. But it is perfect for what I need now. Have to design a box to contain all this stuff.

The display above is me fooling around with DRO stuff. Probably will integrate my DRO display and information into my ELS code. Not sure how I would program stops into it, but hey, that would be V8.00! My ELS code is V0.02...

 

[MyLilMule]

Good deal! Glad it's working out for you (-ish). A little black tape and you'd never see that left side.