- Joined
- Jun 6, 2015
- Messages
- 283
On the 7.5", it's a 3" 3 jaw mounted on a Hardinge 5v mounting plate, found it on eBay. It came from a VN lathe. On the 10", it's the original 6" Cushman 3 jaw Chuck that came with the unit. Both units are ground for the C taper collets though the 10" uses an adapter for this.
The machine and 10" came together, and I stripped both of them and repainted with urethane paint. Color was an arbitrary choice.
The machine and 10" came together, and I stripped both of them and repainted with urethane paint. Color was an arbitrary choice.