- Joined
- Aug 20, 2015
- Messages
- 125
I have a dividing head but it's missing several pieces and I'm having a heck of a time sourcing them.
The dividing head is a NEWS Yuasa "made in Japan" and by the dimensions I believe it is a BS-0 semi-universal. I bought a milling machine and stuff came along with it (this being one of those items).
Problem is, it's incomplete and I'm trying to make it complete...but it's so frustrating I'm about to ebay the thing and buy one complete because I can't find the parts.
Here's what's missing, in order of frustration:
My main issue is, in order:
Thanks so much, photos attached.
The dividing head is a NEWS Yuasa "made in Japan" and by the dimensions I believe it is a BS-0 semi-universal. I bought a milling machine and stuff came along with it (this being one of those items).
Problem is, it's incomplete and I'm trying to make it complete...but it's so frustrating I'm about to ebay the thing and buy one complete because I can't find the parts.
Here's what's missing, in order of frustration:
- sector arms
- sector arm retaining clip
- dead center
- thread protector
My main issue is, in order:
- can't find these stand alone, would have to buy $75 kit with plates
- see 1
- I can't find one long enough with the reduced OD tip to fit the dog driver. Also unsure on taper (literature suggests B&S 7 but an MT2 fits in snug but too deep.
- the threads are clearly 8 per inch, but OD is close to 1.2" ??? This also is confusing me with regard to what chuck to buy.
Thanks so much, photos attached.