- Joined
- Jun 19, 2013
- Messages
- 156
A while back I bought a used Ingersoll rand 5hp 2 stage air compressor. This happened to coincide with me moving so it was taken apart to it's major components and store in the garage at the new house for a few months. I'm finally getting around to it and found a missing part.
What is missing looks like a car radiator and associated tubing from the head to the tank. I assume this was meant to cool the air before it entered the tank so the water condenses at the bottom of the tank.
Can I just run a new tube from the head to the tank and bypass this or do I need to replace it or make my own say from galvanized pipe?
What is missing looks like a car radiator and associated tubing from the head to the tank. I assume this was meant to cool the air before it entered the tank so the water condenses at the bottom of the tank.
Can I just run a new tube from the head to the tank and bypass this or do I need to replace it or make my own say from galvanized pipe?