- Joined
- Feb 7, 2012
- Messages
- 541
Just thought I'd post the info in case anyone was interested. I was working with my RF31, and I needed to use the Rotary Table, so I unbolted my rather large 6" vise and moved it over the the right, and set up the R/T in the center portion of the table. When I went to move the table [X] to the right, it bogged down something fierce, like binding on something. After some examination, I thought, well, take the dang vise off the table and slide the R/T over, and lo and behold the table moved fine once the heavy vise was removed. I guess I overloaded the tables max weight capacity, especially on one side. Lesson learned for me...........