Anyone have a copy of the gear change chart for an Atlas 10F. After these many years the one on the inside of the gear case is getting pretty dim, and my eyes aren't as young as they once were. I appreciate any help you all can give.
-
Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!
John- from the Volunteer State
- Thread starter jmankin
- Start date
- Joined
- Jan 28, 2011
- Messages
- 3,504
View attachment 60882
There is one in the downloads area. This is the 10/12 Change gear chart from the manual. I also have posted a long time ago, the 10D version but it is a bit different due to the 10F not having 96 tooth change gears and and having the 16/32 compound gear behind the spindle.
It is in this thread.
http://www.hobby-machinist.com/showthread.php/15360-Early-Atlas-64-tooth-gear-setup
Pierre
There is one in the downloads area. This is the 10/12 Change gear chart from the manual. I also have posted a long time ago, the 10D version but it is a bit different due to the 10F not having 96 tooth change gears and and having the 16/32 compound gear behind the spindle.
It is in this thread.
http://www.hobby-machinist.com/showthread.php/15360-Early-Atlas-64-tooth-gear-setup
Pierre
- Joined
- Dec 25, 2011
- Messages
- 10,540
John,
You have to get to 30 valid posts before you can download files. However, if you'll send your email address to wa5cab@cs.com, I'll send you the 10F Series threading chart.
Robert D.
You have to get to 30 valid posts before you can download files. However, if you'll send your email address to wa5cab@cs.com, I'll send you the 10F Series threading chart.
Robert D.