Looking for a lathe near the Fort Collins-Denver CO. Can travel within say a day and have a trailer. I have up to ~84" of total width to work with for a floor unit. I can handle bench top units with a total width around ~60". Looking for a swing of ~9-14" and ~30" between centers. I can power maximum 5HP (off-grid) and can convert via VFD or phase converter to 3PH at lower HP. Prefer a used machine in good shape as opposed to a new import in this machine-desert. Budget of up to $5K depending of course on machine, tooling etc. Mostly hobby, smaller diameter work.