Not sure if it's embarrassing or vilifying, but the process I used for tramming the vise is nearly the same as in the video. I even have a similar "one knob" mag base, and stuck it to the quill like he did.
I did pick up from the video where I'm sure my difficulties stemmed; I didn't partially tighten one of the hold down bolts. As such, the light taps on the vise body were moving the whole thing far too much, and I was literally chasing a moving target.
Another item gleaned off the video are the table covers that also center the vice. A set of those are now on my to-do list.
I did pick up from the video where I'm sure my difficulties stemmed; I didn't partially tighten one of the hold down bolts. As such, the light taps on the vise body were moving the whole thing far too much, and I was literally chasing a moving target.
Another item gleaned off the video are the table covers that also center the vice. A set of those are now on my to-do list.
Last edited: