- Joined
- Jan 22, 2020
- Messages
- 197
I am just bedding my Cazaneuve HB575
I Have no machine level
so I laid a 6 foot straight edge across the apron, then stuck a tape measure on one end and sighted it with a very accuarate dumpy,then put the tape on the other end, it was then leveled spot on, the straight edge was checked for true on the bed
trubble is all my mics have vanished so cannot check runout
I Have no machine level
so I laid a 6 foot straight edge across the apron, then stuck a tape measure on one end and sighted it with a very accuarate dumpy,then put the tape on the other end, it was then leveled spot on, the straight edge was checked for true on the bed
trubble is all my mics have vanished so cannot check runout