- Joined
- Feb 17, 2021
- Messages
- 419
looking for a power hack saw in the south seattle area around $100?? if ya have anything send PM thanx
-
Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!
LOOKING FOR POWER HACK SAW SOUTH SEATTLE
- Thread starter riversidedan
- Start date
- Joined
- Apr 14, 2014
- Messages
- 2,372
A little more information as to exactly what you're looking for would be helpful. Power hacksaws come in sizes from 6"x 6" to ones that can cut stock up to 30" in diameter and larger. There are hobby grade, commercial grade, and industrial grade machines. Most commercial and industrial grades can be either wet or dry cut.
Some of the most popular for home shops are Peerless or Racine 6"x 6" wet saws like this.
I have a Racine model W662 from the late 1950's. They usually go for $300.00 and $800.00 depending on condition and location.
Some of the most popular for home shops are Peerless or Racine 6"x 6" wet saws like this.
Power Hack Saw Peerless Speedy-Cut 6x6 | eBay
Saw runs fine. I believe this is the only part that was removed to disengage the auto pressure feed.
www.ebay.com
I have a Racine model W662 from the late 1950's. They usually go for $300.00 and $800.00 depending on condition and location.
It can take up to an hour for ads to appear on the page. See our code implementation guide for more details.
If you already have Auto ad code on your pages there's no need to replace it with this code