Manual for an enco 12x36 510-2584

A

aGinger

Registered
Registered
Joined
Feb 12, 2021
Messages
8
Hi Folks!

Wondering if anyone has a manual kicking around for an enco 12x36 510-2584 Lathe?


Mine took a terrible spill while moving and im looking for some parts numbers and diagrams
 
Also, wondering if the Grizzly G0791 / G4003G are clones/similar enough - if anyone has experience with these
 
I have one for mine which is a 13x40. I imagine it will be the same. I could send you a picture or two of the parts diagrams.
 
NCjeeper said:
I have one for mine which is a 13x40. I imagine it will be the same. I could send you a picture or two of the parts diagrams.
Click to expand...

I'd greatly appreciate it if you could send me a picture of the Saddle/Apron and the feed-control (two levers) area please
 
Crossing to Grizzly parts is likely your best option since Enco parts are probably not available nowadays
Here are two Enco manuals I have:
 

Attachments

  • Enco - Lathe 110-1351007- Operation Manual.pdf
    1.9 MB · Views: 3
  • Enco-110-2075-79 -Manual-11-13-14.pdf
    3 MB · Views: 4
You must log in or register to reply here.
Back
Top