[Drill] Manual For Model 919 Drill Press

[Enf0rc3r]

Hey all. I have a 1983 central machinery model 919 drill press 1/3 HP in excellent condition that I picked up for $10. I am looking for a breakdown or a manual for it. I want to take it apart and luge the bearings and clean it up good as the previous owner used it for wood work.

 

[CluelessNewB]

There is a Forum on this site dedicated specifically to Harbor Freight (Central Machinery) tools which might be a better place for this question. Harbor Freight has manuals for most of their current tools available online. If you have pictures of your machine it might be helpful since many of these machines made in Taiwan and China were sold with various brand names. For example I had a mid 1980s drill press that was labeled "Reliant" which was identical except for color to my neighbors Central Machinery machine. (I don't have it or the manual anymore.) You may also want to check for a longer part number, typically H.F. uses 5 digits now (maybe not back then).

Link to Hobby-Machinist Harbor Freight Forum:
http://www.hobby-machinist.com/forums/harbor-freight-central-machinery-busy-bee.101/