- Joined
- Mar 8, 2014
- Messages
- 41
Hi Everyone,
I am planning to install a VFD speed controller on my lathe, which is the equivalent of a Grizzly G4003G. I plan to use a speed range of about 25 to 2,500 RPM, but I will be grateful for any advice about the higher limit. Is the lathe capable of being run at 2,500 RPM?
I am planning to install a VFD speed controller on my lathe, which is the equivalent of a Grizzly G4003G. I plan to use a speed range of about 25 to 2,500 RPM, but I will be grateful for any advice about the higher limit. Is the lathe capable of being run at 2,500 RPM?
Last edited by a moderator: