- Joined
- Feb 24, 2018
- Messages
- 1,044
As I’ve posted before, I have a 12” x 24” aluminum plate bolted to the Rockwell’s (model #21-100) table, with 253 drilled and tapped holes. I made it to do a series of jobs. Then decided to keep it on the mill, as I have 2 others, I remounted the vise and use the mill as usual, the additional table space is handy. The one drawback is the swarf gets into the threaded holes, making clean up a chore, so I roughed out a couple of lexan table covers. They cover the table, during normal use, when I remove the vise, they are easily removed to allow access to the the threaded holes. The lexan was scrap left over from another job.
Last edited: