When I did mine I used a 1/2" rougher then finished it with a 1/2" end mill. Can't remember if it was a 2 or 4 flute.
Tom S.
-
Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!
When I did mine I used a 1/2" rougher then finished it with a 1/2" end mill. Can't remember if it was a 2 or 4 flute.
Tom S.
U
umahunter
Forum Guest
Register Today
What yall think of this ???