- Joined
- Feb 8, 2014
- Messages
- 11,145
...need to mill a slightly curved slot on each end of the plate the guide bar...... I am doing this on a mini mill machine.
Maybe I'm just misunderstanding what he wants. I am thinking of a rounded key slot. Half moon type. Which t slot cutter would create a half moon if plunged in on one side.
Picture a flat bar about 18 or so inches long that pivots about the center. The curved slots are on either end, and the curve matches the radius of the distance from the center to the slot, and are used to secure the bar at the desired angle for the taper.