- Joined
- Sep 27, 2014
- Messages
- 3,123
Made this for small stock , dowell pins etc. the little vices swivel-slide lock . The die grinder comes out with two shcs , boring the 1.565 hole in the aluminum knocked my nod out on my mill ,yesterday was a bad day things went smoother today.
So I'll be traming and going thru some things on it tomorrow. Seems to work good the arm is held in with a
1/2" shoulder bolt , brass bushing in arm. These green wheels work good Evan on carbide.
Still have a little to do, round off some corners ,b blast.
So I'll be traming and going thru some things on it tomorrow. Seems to work good the arm is held in with a
1/2" shoulder bolt , brass bushing in arm. These green wheels work good Evan on carbide.
Still have a little to do, round off some corners ,b blast.
Last edited: