- Joined
- Oct 20, 2014
- Messages
- 133
This is my first start to finish follow instructions & drawings project. It's the first item in Harold Hall's "Lathework" book.
I'm reasonably happy, it taught me a lot, had lots of different tasks to perform. Biggest thing I learnt is once you start to vary dimensions, eventually you will come unstuck.
It's not 100% functional for adjustment it relies on the 0.3mm displacement differential between a 6mm x 1.0 thread and a 4mm x 0.7 thread and my threads just aren't clean enough to work properly so I will need to remake it at some point.
Anyway for now, I'm calling it good.
pete
