Motor Wiring Diagram Central Machinerys Mill/t-2119/9970

[Daddy Dave]

Thanks Folks! Bought a used mill from a friend. The motor had been removed to make it easier to transport. But no diagram was made. The wire harness from the switch has 5 wires; green for grd, white, red, black and blue. These go to a 6 lug block in the junction box mounted on the motor. Iv'e tried everything else with no luck. I'm good with electrical issues. But guessing wrong can be expensive. Any help would be graciously appreciated!! Thanks! Dave.......

 

[kd4gij]

The manual can be found here. It does appear to have the wiring diag.
http://cholla.mmto.org/machining/hfmill/33686.pdf

 

[Daddy Dave]

The manual can be found here. It does appear to have the wiring diag.
http://cholla.mmto.org/machining/hfmill/33686.pdf

Thanks Friend. That's a big help. The color codes are different on the dia; two blue wires a brown and a white. To my red, white, black and blue. But that gives me a place to start. Thanks again!! Dave...............

 

[Daddy Dave]

Central Machinery #33686 Mill/Drill wiring. Well, just when I want to open a "Bud" and pat myself on the back. The wiring dia for my machine is different. The only manual from Harbor Frieght available is for the 1998 motor. Mine is a "92." The barrel switch has 8 terminals, mine has six. And the color codes are all different
If anyone out there has an older machine with the 6 lug switch with red, blue, black and white wires going to the motor I'll buy you a "Bud." Thanks!!!!! Dave....