- Joined
- May 7, 2014
- Messages
- 165
Ok, having a problem with this motor on a small bench mill. I flip the switch, there is a flash and a puff of smoke, I inhale, the room starts to spin, then it runs fine. The side has L-R and a bolt with an arrow. The bolt is towards the R but not on it. Should I move it all the way over to R? Is R-L the rotation? I have never seen a motor like this and figured I would ask before doing anything. It looks real old but there is a tag on it so it must have been serviced at some point in its life.