Picked up this machine from a retired guys basement! Was quite the battle to get it up the stairs. Anyways I posted a video on YouTube Nantong Milling Machine Cross Feed Missing Part? I took this apart and replaced all the bearings and gave it a good clean up! I think I’m missing a part? If anyone has this machine can check their machine. Looking to get DRO and power feed. Installed front splash and rear splash rubber guard. Not sure where to mount collet holder and DRO any pics or ideas would be greatly appreciated!
Attachments
-
3D0135A8-EC1F-4C52-84A6-CE5692544C5A.jpeg1.4 MB · Views: 275
-
3C549B42-B733-42DF-9176-ABA828354CF3.jpeg1.4 MB · Views: 221
-
402D32FF-04F0-4DF0-B6A1-FF3A789F5C35.jpeg1.4 MB · Views: 166
-
EDDCE3DD-4958-4328-859F-5228583F880F.jpeg1.3 MB · Views: 177
-
2372CDE7-BC9E-46AC-B384-D884BC59A830.jpeg1.8 MB · Views: 159
-
90A5C83C-164E-42DB-9B67-A48A80463367.jpeg1.3 MB · Views: 148
-
1AC013C9-857C-49F0-B07D-FA0D49BA211C.jpeg1.4 MB · Views: 179
-
B353ADC9-DFDA-47CA-A1A2-74CE4C3A8B87.jpeg1.2 MB · Views: 197