VN Need A Part For My Vn 12

[Jason Annen]

The support on the right hand side of the table is cracked, probably a result of the power feed running too far. Anyway, I need one, and I would rather buy than make, if I can. Cash or trade, let me know if you have one.

Jason

 

[Cal Haines]

You should be able to braze it up and use it. The odds of finding one that isn't broken are slim and none.

Cal

 

[Uglydog]

Like Cal said!
Plus, I wonder if you could notch the crack. Fill it with braze then file it flat. A good coat of paint and you wouldn't know she was patched.
However, while I braze, I won't pretend to be good at it.
Please confirm that my suggestion is worth trying before doing.

Daryl
MN

 

[Jason Annen]

Cracked probably isn't the best term, the bracket is damaged on both sides, and does not sit flat when bolted to the table. It's working for now, but I think I'll just make one this winter when I have more time.

Jason

 

[Silverbullet]

I would gouge out the cracks , clean it really well then braze it melt in as much braze as you can . When done wrap it up in some old blankets to help keep the warmth in and let it rest overnite or longer let it cool down very slowly . Then I'd do some light machining to square it up and fit it where it belongs. It will hold up as long as a new one would. Brazing cast is better then welding it. Oh and don't be surprised how much oil burns out of the cast clean it a few times by heating it and get as much oil out as you can just don't melt the casting.

 

[larryr]

The support on the right hand side of the table is cracked, probably a result of the power feed running too far. Anyway, I need one, and I would rather buy than make, if I can. Cash or trade, let me know if you have one.

Jason

View attachment 110083

i have seem a number of these vn 12's and they all seem to have suffered the same failure. i seriously doubt that you will find one. they would make a good project for a backyard foundry. i wouldn't be afraid to make one out of aluminum if you added some beef to it .