- Joined
- Apr 12, 2015
- Messages
- 45
I want to cut an 11 1/2 TPI thread for a pipe fitting but my thread chasing dial has me bamboozled.
It comes with two different sized drive gears, 14 and 24 tooth, with corresponding reference dials.
The body of it has a label telling you which Setup to use for the TPI you want to cut.
Neither indicator is divided into 1/4’s so I’m kinda confused.
Has anyone used this type before or have any suggestions on how to use it.
The lead screw is 4 TPI.
I’ll post pics.
Sent from my iPhone using Tapatalk
It comes with two different sized drive gears, 14 and 24 tooth, with corresponding reference dials.
The body of it has a label telling you which Setup to use for the TPI you want to cut.
Neither indicator is divided into 1/4’s so I’m kinda confused.
Has anyone used this type before or have any suggestions on how to use it.
The lead screw is 4 TPI.
I’ll post pics.
Sent from my iPhone using Tapatalk