Need help in selecting a Collet Chuck for my 1022

Found it! Here's a copy of the invoice from Grizzly. As you can see the part # is different + I ordered the Plug Bolts that attach the Back Plate to the spindle. Very minimal lathe work to make it work. Had to true all surfaces and make sure the register was true. For what I paid, it was an exceptional bargin.
 

Attachments

  • invoice.jpg
    invoice.jpg
    529.3 KB · Views: 114
Thank you so much for this info. I have searched everywhere for this backplate. The price sure beats PM $69 (I received 2 4 bolt plates, needed 3 bolt).
 
The ER 40 set tru from Shars is a better choice. I didn't take pictures. I adapted a PM backing plate and press fit a chunk for the chuck to push against. Worked great but the adapter plate wasn't the greatest fit so I have to dial it in each time I put it on. I'll fix that later.

The ER40 collets hold much greater range. I have a set that covers every 1/32" from 1/8" to 1". That means there is no diameter in that range I cannot hold. Metric or standard means nothing.
 
You must log in or register to reply here.
Back
Top