- Joined
- Sep 29, 2013
- Messages
- 130
Hi all. I posted my lathe alignment problem in the Grizzly forum. I thought I would put a link to it here in this forum to get a wider audience. I hope this is okay. Please feel free to delete if this is not acceptable. Thanks for any help!
Bob J
http://www.hobby-machinist.com/showthread.php/18734-New-G4003G-Lathe-Alignment-Problem
Bob J
http://www.hobby-machinist.com/showthread.php/18734-New-G4003G-Lathe-Alignment-Problem