Here's the two tricky ones for my BP which is the same-ish mill, I thought I had more pictures
The column I moved by cutting a hardwood 4x8, getting it inside the column with the side door and just wrapping a strap around it
The knee I moved with a furniture dolly, its only like 300 pounds
The Ram had a eyelet hole on top to be lifted from, but it took a lot of screwing around to come apart
If you are trying to move the mill with the knee still on it the center of gravity will be pretty far forward, I would move it all the way down, engage the lock on the Z and try to lift it the same way with the knee away from the crane, very carefully
The column I moved by cutting a hardwood 4x8, getting it inside the column with the side door and just wrapping a strap around it
The knee I moved with a furniture dolly, its only like 300 pounds
The Ram had a eyelet hole on top to be lifted from, but it took a lot of screwing around to come apart
If you are trying to move the mill with the knee still on it the center of gravity will be pretty far forward, I would move it all the way down, engage the lock on the Z and try to lift it the same way with the knee away from the crane, very carefully
![8UQ8XY6.jpg](/proxy.php?image=https%3A%2F%2Fi.imgur.com%2F8UQ8XY6.jpg&hash=8343dd8936bda04b59edcfb5c0d71a5b)