- Joined
- Apr 23, 2011
- Messages
- 2,476
Final assembly. Going to busier than a 1 armed paper hanger getting this glued and clamped with everything just right and no glue getting on bits that it shouldn’t be on. I superglued the bristle strip to the top of the bearing block as well as some hot epoxy to support where the bristle strips overhang.
I finished it with tung oil and in a few weeks, after it has dried properly it will get a coat of carnauba wax and orange polish.
cheers Phil
I finished it with tung oil and in a few weeks, after it has dried properly it will get a coat of carnauba wax and orange polish.
cheers Phil