- Joined
- Dec 15, 2011
- Messages
- 191
Hi all,
Here is a bunch of tool holders for my Atlas 10F I purchased the plans a number of years ago and Omni post does not sell the kit any more.
The kit came with the drawings and the steel, I did screw them up the first time I made them,all of them were too big,at least I salvaged the posts.
All the ones in the photos are correct.I can't post drawings as per my agreement with Omni post but you could use your imagination.
These are good for a 9-10 or 12 inch lathe these are rock solid and cut very well.These also work on the Mini lathe I have an atlas 10F and a 7 X 10 mini lathe.
Tooling for all machines in your shop.
Regards
Wally G dgehricke
Here is a bunch of tool holders for my Atlas 10F I purchased the plans a number of years ago and Omni post does not sell the kit any more.
The kit came with the drawings and the steel, I did screw them up the first time I made them,all of them were too big,at least I salvaged the posts.
All the ones in the photos are correct.I can't post drawings as per my agreement with Omni post but you could use your imagination.
These are good for a 9-10 or 12 inch lathe these are rock solid and cut very well.These also work on the Mini lathe I have an atlas 10F and a 7 X 10 mini lathe.
Tooling for all machines in your shop.
Regards
Wally G dgehricke