Omni Post a week end project

[dgehricke]

Hi all,
Here is a bunch of tool holders for my Atlas 10F I purchased the plans a number of years ago and Omni post does not sell the kit any more.
The kit came with the drawings and the steel, I did screw them up the first time I made them,all of them were too big,at least I salvaged the posts.
All the ones in the photos are correct.I can't post drawings as per my agreement with Omni post but you could use your imagination.
These are good for a 9-10 or 12 inch lathe these are rock solid and cut very well.These also work on the Mini lathe I have an atlas 10F and a 7 X 10 mini lathe.
Tooling for all machines in your shop.

Regards

Wally G dgehricke

 

[chuckorlando]

Nice. Thanks for the pics. I enjoy looing at the process folks use

 

[dgehricke]

Hi Chuck,
Thanks for the response and here is the link that I forgot to post.
< http://www.krfcompany.com/overview.html >
Your also my neighbor I see, just down the wonderful 1-4.about 70 miles.
Regards
Wally G dgehricke

 

[chuckorlando]

Yea we are in Tampa a few times a year. I We got some mini buggy riding friends down your way. Lotta good craigslist buys down your way as well. Seems yall have better deals then we have.

Again fine work man

 

[dgehricke]

Yea but all the good deals cost like they are New !
Thanks again
Regards
Wally G dgehricke

 

[pojotex]

I like! Very nice. Wish I could find those plans.